From Zorg NA, this is a new backup camera relocation / retrofit kit. It's for use in situations where your truck's factory tailgate backup camera needs to be removed, such as when using slide-in campers or salt spreaders, or when using a 5th wheel hitch, or when the factory truck bed was removed & replaced with an aftermarket truck bed or utility body. And if you frequently pull a trailer, you can use this kit plus the appropriate extension cable(s) on your trailer in place of the factory tailgate camera.
Compatible with: 2020-2023 Chevrolet Silverado 3500HD & GMC Sierra 3500HD factory Cab & Chassis trucks ONLY equipped with a backup camera system or camera-ready option from the factory, which includes an 8 pin connector at the rear of the truck. Not for use on trucks with any of the digital backup camera options (RPO Codes DRZ, UVB, UVI, UVN, UVS, or UV2) or analog upfitter camera prep package (RPO 5N5). Not for use on trucks built from the factory with a bed.
This kit includes a 1 meter / 3-1/2' camera interface harness that connects directly the existing factory backup camera chassis connector under the rear of the truck plus your choice of a camera. Extension cables available in lengths of 2, 3-1/2, 10, 15 or 20 meters (6-1/2, 11-1/2, 33, 49, or 66 feet). Simply pick your desired camera from the available choices in the drop down list, optionally add a camera extension cable (or two if you need), and then proceed to check out. Most of the Zorg cameras incorporate a pre-attached 18" cable, so combined with the included 3-1/2' camera interface harness, you'll have right round 5 feet of cable to work with before adding any extension cables.
If you have any questions or need additional information before placing an order, please send us a message on the CONTACT US page on our website. Thank you & have a blessed day!