From Zorg NA, this is a new backup camera relocation / retrofit kit for factory-built Cab & Chassis / Cutaway trucks equipped with a factory backup camera system or equipped with a camera-ready option that includes a display that switches to camera display mode when the truck's transmission is placed in reverse and the truck has the factory 6 pin camera chassis harness connector in place at the rear of the truck. And if you frequently pull a trailer, you can use this kit plus the appropriate extension cable(s) on your trailer in place of the factory tailgate camera.
Compatible with: 2016-2025 Ford Transit 250, 350 & 350HD FACTORY CAB & CHASSIS / CUTAWAY trucks only. Not for vehicles originally built from the factory with standard van bodies. If your Transit has a standard van body, see Zorg's 002-002 kit. Not for use on trucks with 360 degree camera systems.
This kit includes a 1 meter / 3-1/2' camera interface harness that connects directly the existing factory backup camera chassis connector under the rear of the truck plus your choice of a camera. Extension cables available in lengths of 2, 3-1/2, 10, 15 or 20 meters (6-1/2, 11-1/2, 33, 49, or 66 feet). Simply pick your desired camera from the available choices in the drop down list, optionally add a camera extension cable (or two if you need), and then proceed to check out. Most of the Zorg cameras incorporate a pre-attached 18" cable, so combined with the included 3-1/2' camera interface harness, you'll have right round 5 feet of cable to work with before adding any extension cables.
If you have any questions or need additional information before placing an order, please send us a message on the CONTACT US page on our website. Thank you & have a blessed day!