From Rostra Accessories, this is a new tailgate backup camera relocation kit that includes your choice of a heavy duty camera plus a plug & play camera harness. It's for use in situations where your truck's factory tailgate backup camera needs to be removed, such as when using slide-in campers or salt spreaders, or when using a 5th wheel hitch, or when the factory truck bed was removed & replaced with an aftermarket truck bed or utility body. And if you frequently pull a trailer, you can use this kit plus the appropriate extension cable(s) on your trailer in place of the factory tailgate camera.
Compatible with: 2020-2023 Chevrolet Silverado 3500HD & GMC Sierra 3500HD factory Cab & Chassis trucks ONLY equipped with a backup camera system or camera-ready option from the factory, which includes an 8 pin connector at the rear of the truck. Not for use on trucks with any of the digital backup camera options (RPO Codes DRZ, UVB, UVI, UVN, UVS, or UV2) or analog upfitter camera prep package (RPO 5N5). Not for use on trucks built from the factory with a bed.
This kit includes your choice of a 1 meter / 3-1/2' or 5 meter / 15' camera interface harness that connects directly the existing factory backup camera chassis connector under the rear of the truck plus your choice of a camera. See the camera information tab for the length of each camera's attached cable to help determine which length of camera-to-vehicle harness that would be most appropriate for your installation. If you do need an extension harness, they are available in lengths of 2, 5, 10 or 20 meters (6-1/2', 16', 33', or 66'). Simply pick your desired camera from the available choices in the drop down list, optionally add a camera extension cable (or two if you need), and then proceed to check out.
If you have any questions or need additional information before placing an order, please send us a message on the CONTACT US page on our website. Thank you & have a blessed day!