From Rostra Accessories, this is a new tailgate backup camera relocation kit that includes your choice of a heavy duty camera plus a plug & play camera harness. It's for use in situations where your truck's factory tailgate backup camera needs to be removed, such as when using slide-in campers or salt spreaders, or when using a 5th wheel hitch, or when the factory truck bed was removed & replaced with an aftermarket truck bed or utility body. And if you frequently pull a trailer, you can use this kit plus the appropriate extension cable(s) on your trailer in place of the factory tailgate camera.
Compatible with: 2015-2018 Chevrolet Colorado & GMC Canyon trucks originally equipped from the factory with a tailgate-mounted backup camera system and the 2019-2022 Chevrolet Colorado & GMC Canyon base/work trucks equipped with the factory ANALOG tailgate-mounted backup camera system (RPO Code UVC). Not for use on trucks with the factory digital backup camera (RPO Code UVB).
This kit includes your choice of a 1 meter / 3-1/2' or 5 meter / 15' camera interface harness that connects directly the existing factory backup camera chassis connector under the rear of the truck plus your choice of a camera. See the camera information tab for the length of each camera's attached cable to help determine which length of camera-to-vehicle harness that would be most appropriate for your installation. If you do need an extension harness, they are available in lengths of 2, 5, 10 or 20 meters (6-1/2', 16', 33', or 66'). Simply pick your desired camera from the available choices in the drop down list, optionally add a camera extension cable (or two if you need), and then proceed to check out.
If you have any questions or need additional information before placing an order, please send us a message on the CONTACT US page on our website. Thank you & have a blessed day!