New wiring harness kit that will work with Gentex GNTX-177, GNTX-455, GNTX-461 & MagnaDonnelly auto dim mirrors & auto dim compass mirrors with the 7 pin plug in the back of the mirror housing.
**Note regarding the GNTX-461: make sure your mirror has the connector that mates with the wider flat 7 pin plug & not the narrower connector.** Please refer to the pictures of the connectors that this harness will and will not work with.
You'll receive a new wiring harness (2 wires - ignition & ground), zip ties, wire taps, and installation instructions similar to the kit shown in the picture. This is not just a short pigtail - rather, it's a full length harness that is around 9 feet long, which is sufficient to reach to the bottom of the dash.
Please note that this harness is not for mirrors with temperature display and/or maplights.