Kit includes your choice of camera plus a plug & play harness

Rostra Factory Tailgate Backup Camera Relocation Kit For 2017-2023* Ford Super Duty Trucks

Write a Review

Your Price: $207.99

Retail Price:$267.99

You Save:$60.00(22%)

Questions about this item? Be the first to ask here.

Part Number: 500401

Please confirm the following (REQUIRED): *

My truck is equipped with a factory analog tailgate backup camera OR has the factory camera-ready display & chassis harness connector.

REQUIRED: Select length of included camera-to-vehicle hanress *

Required: Pick your choice of heavy duty camera *

OPTIONAL: Add a heavy duty camera extension cable?

OPTIONAL: Add a SECOND heavy duty camera extension cable?

Quantity

Description
Compatibility Info
Camera Features & Specifications
Warranty & Condition

From Rostra Accessories, this is a new tailgate backup camera relocation kit that includes your choice of a heavy duty camera plus a plug & play camera harness. It's for use in situations where your truck's factory tailgate backup camera needs to be removed, such as when using slide-in campers or salt spreaders, or when using a 5th wheel hitch, or when the factory truck bed was removed & replaced with an aftermarket truck bed or utility body. And if you frequently pull a trailer, you can use this kit plus the appropriate extension cable(s) on your trailer in place of the factory tailgate camera.

Compatible with: 2017-2022 and early production 2023 Ford F250 F350 F450 Super Duty trucks originally equipped from the factory with a pickup bed and a tailgate-mounted backup camera system. NOT FOR CAB & CHASSIS MODELS - For those, you'll need one of Rostra's 250-8628 line of cameras. Not for use on trucks with 360 degree camera systems.

This kit includes your choice of a 1 meter / 3-1/2' or 5 meter / 15' camera interface harness that connects directly the existing factory backup camera chassis connector under the rear of the truck plus your choice of a camera. See the camera information tab for the length of each camera's attached cable to help determine which length of camera-to-vehicle harness that would be most appropriate for your installation. If you do need an extension harness, they are available in lengths of 2, 5, 10 or 20 meters (6-1/2', 16', 33', or 66'). Simply pick your desired camera from the available choices in the drop down list, optionally add a camera extension cable (or two if you need), and then proceed to check out.

If you have any questions or need additional information before placing an order, please send us a message on the CONTACT US page on our website. Thank you & have a blessed day!

Camera Information - Scroll down to see pictures & specifications of the various camera options.

250-8149 White & 250-8150 Black IR Camera w/130 Degree View:

Camera Features:

Sony CCD color imager.

130-degree wide view.

976x494 resolution

18-Piece infrared LED's for night vision.

IP69K waterproof.

Adjustable weather shield.

Horizontal reversible image.

Selectable parking grid lines.

12" camera pigtail.

250-8183 flush-mount camera w/150 degree view:

Camera Features:

CMOS color camera with 1/4" camera lens.

150-degree wide view.

Requires 22mm hole.

Bullet design for flush mounting.

Waterproof case with anti-fog lens.

Horizontal reversible image.

Selectable parking grid lines.

18" camera pigtail.

250-8199TAB tab-mount camera w/160 degree view:

Camera Features:

CMOS color camera with 1/4" camera lens.

160-degree wide view.

Includes tab & hinge mounts.

Includes installation hardware.

Waterproof case with anti-fog lens.

Nine parking grid line options.

32" camera pigtail.

250-8147 wedge-mount camera (horizontal or vertical mount) w/160 degree view:

Camera Features:

CMOS color camera with 1/4" lens.

160-degree wide view.

Built-in surface-mounting stud.

Includes VHB seal/tape.

Waterproof case with anti-fog lens.

Horizontal and vertical mount capable.

Selectable parking grid lines.

38" camera pigtail.

250-8184 flush mount camera w/180 degree view w/digitally-corrected image:

Camera Features:

CMOS color camera with 1/4" lens.

180-degree wide view.

Digitally-corrected image (reduces fish-eye effect).

High-Definition 976x592 resolution

Requires 22mm hole.

Bullet design for flush mounting.

Waterproof case with anti-fog lens.

Horizontal reversible image.

Selectable parking grid lines.

18" camera pigtail.

250-8181 license plate bracket camera w/180 degree view:

Camera Features:

1/3" CMOS color camera

High-Definition 1280x720 resolution

License plate-mount bracket

180-degree viewing angle

Horizontal image rotation capable

Selectable parking grid lines

12" camera pigtail.

250-8148 LED 3rd brakelight adjustable camera w/170 degree view:

Camera Features:

Mounts to any flat surface.

Built-in brake lamp for added safety.

170-degree peripheral view.

CMOS color camera with 1/4" lens.

Lens swivels to change viewing angle.

Infrared LEDs for night vision.

IP 68 weatherproof rating.

Selectable parking grid lines.

Measures 7-7/8" wide x 1-15/16" tall.

12" camera pigtail.

250-8098 stainless steel extreme duty IR camera w/160 degree view:

Camera Features:

CCD color camera with 1/4" lens.

160-degree wide view.

12-Piece infrared LED's for night vision.

Waterproof case with anti-fog lens.

Adjustable weather shield.

Includes mounting hardware.

Stainless steel housing.

41" camera pigtail.

[history_item_name]

[ITEMPRICE] ~~[ITEMPRICE] Original price~~ [ITEMSALEPRICE] Sale

Clear

Rostra Factory Tailgate Backup Camera Relocation Kit For 2017-2023* Ford Super Duty Trucks

Choose Options

Recently Viewed Items

Mailing List