This is a new 10 pin male to 10 pin female rearview mirror T harness that will allow you to connect a dash cam, radar detector, or other 12 volt device, without having the cut & splice your factory wiring! This T harness plugs into the existing 10 pin male connector on your vehicle's OEM mirror bracket & the 10 pin female connector on your vehicle's factory mirror wiring harness & includes an ignition-switched wire and ground wire, both 12 inches long, to power your dash cam, radar detector, etc. Please note that this DOES NOT include any sort of USB adapter, so if your device needs to be connected to a 5V USB source, you'll need to add your own USB module.
We have several of these T harnesses available - be sure to look at the pix, compare the pinouts that show the occupied positions of the 10 pin connector with your vehicle & then select the appropriate one for your vehicle when placing the harness in your cart.
IMPORTANT: This harness will work on any Hyundai or Kia vehicle that has a mirror with 10 pin connector located ON THE MIRROR BRACKET ONLY. This will not work on mirrors with the 10 pin connector located in the back of the mirror housing.
HomeLink® consists of three buttons conveniently located on the mirror that can be programmed to operate garage doors, estate gates, security systems, home lighting and other radio-frequency controlled devices. HomeLink® and the HomeLink® House are registered trademarks of Gentex Corporation.
[ITEMPRICE]