Every so often, we need to clear out our B stock mirrors. These mirrors all work perfectly, but they just don't meet our requirements to sell them at their regular price. What this means is that if you don't mind a mirror that may have some minor blemishes in the glass and/or on the housing, such as small chips, scuffs or scratches, you can pick up a mirror & wiring kit for a fraction of the cost of a comparable new mirror! Because of the extremely low prices we are selling these at, we are not able to provide detailed pix of the mirrors, so the mirror picture in this listing are stock photos showing the same style of mirror you will be receiving.
This listing is for a used Gentex GNTX-830 auto dimming rear view mirror with 3.5" backup camera display & universal wiring harness & basic installation hardware. Wiring harness is right around 9 feet long and is comprised of three wires - ignition, reverse & ground, plus a female RCA cable. This will fit any vehicle that has a standard wedge style of mount on the windshield.
IMPORTANT: some newer vehicles may also need a spacer to bring the mirror a little further out from the windshield, as some models have a black plastic cover that may slightly interfere with the mirror - this also depends on multiple other factors, such as height of the driver, how far the driver sits from the mirror, and so on, so the spacer may not be needed for all situations. If one is needed, be sure to select the option when adding the mirror to your cart.
Optionally, you can add your choice of a long or short adjustable wire cover. The long cover adjusts from 4-3/8" minimum to 7-1/4" maximum with a channel that measures 3/8" x 3/8". The short cover adjusts from 2-1/2" minimum to 4" maximum with a channel that measures 3/16" x 3/8". Wire cover will not work on vehicles that have a black plastic shroud on the windshield surrounding the mirror stem.
Basic installation instructions included.