Gentex Homelink semi-frameless mirror with floating compass display
Gentex Homelink semi-frameless mirror with floating compass display

Gentex Auto Dim Mirror w/Homelink®V5 & Compass Display Plug & Play For 2000-2020 Subaru Vehicles

Your Price: $148.99
Part Number:100031

Choose Options

Required-Select the OEM mirror connector in your vehicle
Select whether or not you need the camlock-to-wedge adapter
This is a nice used Gentex semi-frameless auto dimming rear view mirror with compass display & Homelink® Version 5 that will fit most 2000 thru 2020 Subaru vehicles that are pre-wired from the factory for an auto dimming mirror & for these vehicles, it's a very simple plug & play upgrade!!  This will also fit vehicles made by Subaru for Saab, those being the 2013-2016 Scion FR-S and 2005-2006 SAAB 9-2x. 

You'll need to check your vehicle to determine which connector is in place above the overhead console.  Almost all 2000-2013 pre-wired vehicles will have a white 3 pin connector tucked away above the overhead console.  2014 and newer pre-wired vehicles may have this same connector, or they may have a white 5 pin connector.  Also, some 2014 and newer vehicles may not have any mirror wiring in place. Please refer to the Installation Notes tab for more information on the connectors to look for in your vehicle. 

In addition, some vehicles will require a camlock-to-wedge mount adapter in order to install the mirror in your vehicle.  Please refer to the Installation Notes for more information.

IMPORTANT: On Subaru vehicles, because of how they are wired, Homelink® will only operate when the ignition is on.

What's the difference between Homelink® Versions 4 and 5?  Both versions are compatible with all openers, current & prior.  Version 5 adds the garage door up/down indicators, a feature which will only work if you have a newer opener that has the ability to communicate this information to the mirror.

You will receive:
Nice used Gentex semi-frameless auto dim mirror with compass display & Homelink® Version 5 with 3 pin or 5 pin connector attached to the cable coming out of the back of the mirror. 
Homelink® programming & compass calibration instructions
OPTIONAL: Camlock-to-wedge mount adapter (additional cost)

This mirror has Homelink® version 5 & should work with just about any Homelink® device, current or prior. For more information please click here for the Homelink® website

HomeLink® consists of three buttons conveniently located on the mirror that can be programmed to operate garage doors, estate gates, security systems, home lighting and other radio-frequency controlled devices. HomeLink® and the HomeLink® House are registered trademarks of Gentex Corporation. 

If you have any questions or need additional information before placing an order, please send us a message on the CONTACT US page on our website. Thank you & have a blessed day!