This is a new Rostra #250-8821 auto dimming rearview mirror with 4.3" camera display with DUAL CAMERA INPUTS & OnStar controls, as well as compass and temperature display. This will fit the a variety of GM vehicles currently equipped with the factory autodim OnStar® or manual dim Onstar® mirror with either a 10 pin or 16 pin mirror connector (which means thousands of GM vehicles back to the 2000 model year!). Not for cars equipped with plain mirrors.
This mirror plugs into the factory 10 pin mirror connector on your vehicle, or the 16 pin mirror connector using the supplied adapter harness, and there is a separate harness on the mirror for the 12 volt accessory, reverse trigger and auxiliary camera trigger wires, as well as two RCA cables for the camera inputs. ***IMPORTANT: On vehicles that were originally equipped with the autodimming OnStar mirror, you will still have to separately hook up the ignition, reverse & ground wires even though these are presently in place in the factory mirror harness, but they are not in place in the 10 pin connector on the new mirror. You will need to determine where to make these connections in your vehicle. Same goes for the two temperature sensor wires - you can either use the supplied temperature sensor, or use your vehicle's existing temperature sensor wires (only on GM vehicles equipped with the factory compass temp mirrors)***
Cameras are not included. We have many different cameras available, please see our store or contact us for a recommendation.
Large 4.3” diagonal TFT LCD display with 16:9 wide-screen aspect ratio.
Compass & temperature display (in degrees C or F) (NOTE: mirror has the "hidden" style of display so when on, the compass/temp display appears to float behind the glass).
Auto-dimming mirror glass reduces glare for nighttime driving.
Quick Touch auxiliary camera view with auto-off. Allows you to view the auxiliary camera connected to the 2nd input with the touch of a button.
Dual RCA video inputs with individual triggers - backup camera & auxiliary camera.
Auxiliary input can be used with a forward-facing camera, blind spot camera, cargo camera or trailer camera, and can be further expanded with a multi-input camera switcher, available separately.
Integral OnStar® buttons.
User-adjustable parking grid lines (lines can be turned off if desired).
Remote control access to built-in functionality.
Includes wire cover & torx/star drive wrench too!
Custom adapter harness included too. No cutting or splicing of the vehicle wiring is required for installing this mirror - just unplug & remove the OEM mirror & replace it with this one!!