7 pin plug & pigtail that can be used on Gentex and MagnaDonnelly rearview mirrors. Pigtails measure at least 3" long & will have at least 4 wires in the connector. Connector pinout included. Picture is representative of what you will be getting, which is a 7 pin mirror connector & short wiring pigtail and it will not be 100% exactly as shown in the picture - some have heat shrink tubing on them, others have black tape, while others may have some of both, or just plain wires and the connector may be black or white in color.
Pigtail will fit the 7 pin version of the following mirrors: GNTX-125, GNTX-126, GNTX-140, GNTX-177, GNTX-187, GNTX-208, GNTX-221, GNTX-455 as well as the MagnaDonnelly versions of the same - see the last 3 pix for the various styles of 7 pin connectors used on these mirrors. Please note that the mirror designation does not always mean it will have the 7 pin connector...there are variations of the mirrors that have other connectors, so be sure to confirm that this pigtail will fit your mirror.
If you have any questions or need additional information before placing an order, please send us a message on the CONTACT US page on our website. Thank you & have a blessed day! 
