16 pin plug & pigtail that can be used on various GM mirrors such as the Gentex GNTX-261, GNTX-511 and GNTX-657 and other GM mirrors that have the 16 pin connector located in the rear of the mirror housing.
Pigtails measure at least 3" long (most are usually longer) and will include at least 5 wires. Picture is representative of what you will be getting, which is a 16 pin mirror connector & short wiring pigtail and it will not be 100% exactly as shown in the picture - some have heat shrink tubing on them, others have black tape, while others may have some of both, or just wires. Wire colors will vary too. You will receive ONE pigtail that has at least 5 wires in it, along with a pinout showing the various wire functions on these mirrors. If you need a pigtail with more than 5 wires in it, not a problem - just ask, as we have a variety of these in stock! Information on how to remove & replace the wires in the connector will also be included.