10 pin / 3 wire plug & pigtail that can be used on Gentex GNTX-313, GNTX-341 or GNTX-453 Homelink® auto dim or compass-auto dim rear view mirrors that have the 10 pin connector located in the rear of the mirror housing. See the 2nd picture for the 10 pin connectors used on these mirrors.
Pigtails measure at least 3" long (most are usually longer). Picture is representative of what you will be getting, which is a 10 pin mirror connector & short wiring pigtail and it will not be 100% exactly as shown in the picture - some have heat shrink tubing on them, others have black tape, while others may have some of both, or just wires. Wire colors will vary too. You will receive ONE pigtail that has at least 3 wires in it, along with a pinout showing the wire functions. If you need a pigtail with more than 3 wires in it, not a problem - just ask, as we have a variety of these in stock!